Description
3-Color EPD: Upgrade Your Displays
The ShenZhen Techstar Electronics Incorporated Co., Ltd SFEPD213BWR-7018A01 is a 2.13″ Electronic Paper Display (EPD) that delivers crisp visuals and remarkable advantages for your applications:
- Vibrant 3-Color Display:Â Showcase information clearly with white, black, and red.
- High Resolution:Â Render fine details with ease thanks to a 131 dpi resolution.
- Energy Efficient:Â Enjoy ultra-low power consumption and images that persist without power.
- Wide Viewing Angles: Near 180° viewing angles for maximum visibility.
- Slim and Lightweight:Â Ideal for sleek, space-conscious designs.
- Easy Integration:Â SPI interface for smooth implementation.
- Environmentally Friendly:Â RoHS compliant.
Perfect for Electronic Shelf Labels
This display is an outstanding choice for electronic shelf label systems (and other similar applications) due to its clarity, efficiency, and adaptable design.
| Screen Size | 2.13 inch | ||
|---|---|---|---|
| Display Mode | Active Matrix EPD | ||
| Display Resolution | 122(H)×250(V) Pixels | ||
| Active Area | 23.705(H)x48.55(V) mm | ||
| Pixel Pitch | 0.194.3 x 0.194.2(131dpi) | ||
| FPL (Front Plane Laminate) | Spectra Red 2.0 | ||
| Outline Dim.: | 29.2(H)x59.2(V)x1.0(D) mm | ||
| Weight | 4.1 g | ||
| Logic supply voltage | 3.0V typical | ||
| Operation Temperature | 0°C to +50°C | ||
| Storage Temperature | -25°C to +60°C | ||
| Controller: | SPLC780D Or Equivalent | ||
| Interface: | SPI | ||
| Compliance: | REACH & RoHS Compliant | ||
3 colors EPD 2.13 inch Screen, 2.13″ E-ink ESL Display Drawing
Interface Pin Definition
| Pin # | Single | Description | Remark |
| 1 | NC | No connection and do not connect with other NC pins | Keep Open |
| 2 | GDR | N-Channel MOSFET Gate Drive Control | |
| 3 | RESE | Current Sense Input for the Control Loop | |
| 4 | NC | No connection and do not connect with other NC pins | Keep Open |
| 5 | VSH2 | Positive Source driving voltage | |
| 6 | TSCL | I²C Interface to digital temperature sensor Clock pin | Note 6-6 |
| 7 | TSDA | I²C Interface to digital temperature sensor Data pin. | Note 6-6 |
| 8 | BS1 | Bus selection pin | Note 6-5 |
| 9 | BUSY | Busy state output pin | Note 6-4 |
| 10 | RES # | Reset signal input. | Note 6-3 |
| 11 | D/C # | Data/Command control pin | Note 6-2 |
| 12 | CS # | The chip select input connecting to the MCU. | Note 6- 1 |
| 13 | SCL | Serial clock pin for interface. | |
| 14 | SDA | Serial data pin for interface. | |
| 15 | VDDIO | Power input pin for the Interface. | |
| 16 | VCI | Power Supply pin for the chip | |
| 17 | VSS | Ground (Digital) | |
| 18 | VDD | Core logic power pin | |
| 19 | VPP | Power Supply for OTPÂ Programming | |
| 20 | VSH1 | Positive Source driving voltage | |
| 21 | VGH | Power Supply pin for Positive Gate driving voltage and VSH | |
| 22 | VSL | Negative Source driving voltage | |
| 23 | VGL | Power Supply pin for Negative Gate driving voltage, VCOM and VSL | |
| 24 | VCOM | VCOM driving voltage | |
DC Characteristics
| Symbol | Parameter | Test Condition | Applicable pin | Min. | Typ. | Max. | Unit |
| VCI | VCI operation voltage | VCI | 2.5 | 3 | 3.7 | V | |
| VIH | High level input voltage | SDA, SCL, CS#, D/C#, RES#,BS1 | 0.8VDDIO | V | |||
| VIL | Low level input voltage | 0.2VDDIO | V | ||||
| VOH | High level output voltage | IOH = – 100uA | BUSY | 0.9VDDIO | V | ||
| VOL | Low level output voltage | IOL= 100uA | 0. 1VDDIO | V | |||
| Iupdate | Module operating current | – | 3 | – | mA | ||
| Isleep | Deep sleep mode | VCI=3.3V | – | – | 3 | uA | |
3 colors EPD 2.13 inch Screen, 2.13″ E-ink ESL Display Product ImageÂ
Reviews
There are no reviews yet.